Archives For Speed hump

A few weeks ago I blogged about some speed bumps that would be put on the ramps at work to slow cyclists down.

The bump was installed around 2 weeks ago and as my colleague put it the other day

it’s pathetic

We where all expecting the style of bump you find in supermarket car parks which are very steep. This would of course make sense, with most bicycle tyres being 26″ or larger in diameter, a bump which would force a wheel of such size would also have to affect other vehicles, it is basic physics.

Instead the bump installed only goes to the dizzying height of 15mm off the ground, this of course causes no issues for cyclists and has resulted in many of us not needing to slow down for it. I asked a different colleague if he had noticed the joke of a speed bump they had installed, his response

they installed the speed bump already? I didn’t even notice

The building management do really confuse me, they are perfectly happy to waste money on a product which affects nobody but they don’t want to listen to you when you mention the cycle racks are not safe or that the air conditioning is not working (a separate issue).

Hump de Bump

January 25, 2012 — 2 Comments

I blogged in the past about issues I was having with the building management and the bike stands provided at work. After several bicycles where stolen from the basement the security decided to take a more proactive action with regards to cyclists.

This has resulted in those of us not able to use the racks due to full length mudguards or we use non-standard design bikes being punished as we are forced to use them or our access will be taken away. I argued that the racks where not secure and can damage bicycles but it went unheard.

In recent weeks a pass reader was put half way up the exit ramp, something which only cyclists have to use as motorised vehicles set of an automatic gate opener in the floor. This is obviously quite a pain as you either have to be perfectly skilled to be able to touch the card on the reader whilst cycling up the ramp and time it so that you get to the gate just as it opens, or stop and touch in. The later results in an uphill struggle as setting off again on a slope of this nature is not easy.

I can see why the building management decided why this would be a good idea, as the thieves where coming from the outside and able to leave at a push of a button. But why put the reader in such an inconvenient place?
Well that would be where the previous button was and to save re-wireing the whole system they decided to replace the button with a card reader. It would be much more sensible to put the reader at the bottom of the ramp where it is flat, so that you don’t have to start off on a slope.

There is a flaw in whole concept of touching out to open the gates. The gates are open for a fair amount of time after you have touched in, this means that multiple cyclists can get out at once. All you have to do is wait for a cyclist do go up the ramp and touch out, to get out without a pass.

Anyway on to the subject of this post.
An e-mail was sent out yesterday about the installation of speed bumps on the ramp due to a few near misses and apparently an accident because of speeding cyclists down the ramp.

Please be advised that on Saturday 28th January we have arranged an installation of speed humps on both of the ramps leading to the car park. They will be installed 2/3rd way down the ramp in order to control the speed of cyclists. We have experienced several near misses and an accident resulting from speeding cyclists therefore these precautions are necessary.

Further on in the e-mail

We recommend that the cyclists should walk down and push their bike both down and up the ramps.

Well I also hope that they recommend drivers and motorcyclists to get out of their vehicles and push their cars/vans/motorbikes up and down the ramps.

I managed to find out what kind of bumps they will be installing, its dimensions don’t look too bad and i expect only a small change in speed is required to get over them, how wet tyres will handle them, I’m unsure.

I spoke to a few colleagues about this and we certainly feel that the building management is a bit of a joke. We will try to form together a group and see if we can use our numbers to battle them. I suspect that getting together with the other companies in the building is going to be required, and this is going to be the tricky part.